Ero sivun ”Seatrace tiedostoformaatti” versioiden välillä
Siirry navigaatioon
Siirry hakuun
Ei muokkausyhteenvetoa |
Ei muokkausyhteenvetoa |
||
(5 välissä olevaa versiota samalta käyttäjältä ei näytetä) | |||
Rivi 1: | Rivi 1: | ||
SeaTrace on oheisohjelma joka kirjoittaa tiedostoon paljon enemmän dataa mitä SeaClear. Tässä on tiedostoformaatti: | [[luokka:ohjelmistot]] [[luokka:Seaclear]] | ||
SeaTrace on oheisohjelma joka kirjoittaa tiedostoon paljon enemmän dataa mitä [[SeaClear]]. Tässä on tiedostoformaatti: | |||
==Yleistä== | |||
* Data in comma delimited text string | * Data in comma delimited text string | ||
Rivi 5: | Rivi 8: | ||
* Lat & Long in decimal deg | * Lat & Long in decimal deg | ||
* Other angles in Radians | * Other angles in Radians | ||
==Sarakkeet== | |||
{| {{prettytable}} | {| {{prettytable}} | ||
Rivi 55: | Rivi 60: | ||
| 23: Target WP Name || | | 23: Target WP Name || | ||
|} | |} | ||
Item 16 - 23 is only available when route is active | |||
'''Item 16 - 23 is only available when route is active''' | |||
== Laskentaohjeita == | |||
* Saadaksesi asteita radiaaneista voit ainakin Gnumeric taulukkolaskentaohjelmassa käyttää <tt>=DEGREES(solun osoite)</tt> määritelmää. | |||
* Saadaksesi solun Jn (J-sarake on apparenttikulma radiaaneissa) näyttämään +/- asteita: <tt>=IF(DEGREES(Jn)>180,DEGREES(Jn)-360,DEGREES(Jn))</tt> | |||
* Suodattaaksesi piikit ja kuopat datasta, käytä <tt>Tools->Statistical Analysis->Forecast->Moving Average</tt>. Aseta esimerkiksi 30 <tt>Options->Interval</tt>ruutuun. Output <tt>Output range</tt> ja muokkaa vapaa sarakekirjain <tt>$</tt>-kirjaimien perään niin saat tulokset uuteen sarakkeeseen. |
Nykyinen versio 8. toukokuuta 2009 kello 18.16
SeaTrace on oheisohjelma joka kirjoittaa tiedostoon paljon enemmän dataa mitä SeaClear. Tässä on tiedostoformaatti:
Yleistä
- Data in comma delimited text string
- All speed in Knots
- Lat & Long in decimal deg
- Other angles in Radians
Sarakkeet
0: added UTC time and date from Computer, not GPS (note that SeaClear can adjust computers time from GPS) | |
1: GPS Lat position | D.D converted on display to M D.D N+/S- |
2: GPS Long position | D.D converted on display to M D.D E+/W- |
3: GPS Speed | knots |
4: True heading from GPS | rad converted on display to deg 0/360 |
5: Magnetic Heading from GPS | rad converted on display to deg 0/360 |
6: Magnetic error from GPS | rad converted on display to deg E+/W- |
7: Depth | meters |
8: True wind dir relative to heading | rad converted on display to deg -180/+180 |
9: Relative wind dir | rad converted on display to deg -180/+180 |
10: Geographical wind dir | rad converted on display to 0/360 |
11: True wind speed | m/s converted on display to knots |
12: Relative wind speed | m/s converted on display to knots |
13: Speed Parallel to Wind | knots |
14: Compass Heading | rad converted on display to deg 0/360 |
15: Water speed | |
16: WP Lat position | D.D converted on display to M D.D N+/S- |
17: WP Long position | D.D converted on display to M D.D E+/W- |
18: RL Bearing origin to destination WP | rad converted on display to deg 0/360 |
19: Current XTE | Nm |
20: RL Heading from current position to WP | rad converted on display to deg 0/360 |
21: Distance to WP | Nm |
22: Waypoint Closure Velocity (speed made good) | knots |
23: Target WP Name |
Item 16 - 23 is only available when route is active
Laskentaohjeita
- Saadaksesi asteita radiaaneista voit ainakin Gnumeric taulukkolaskentaohjelmassa käyttää =DEGREES(solun osoite) määritelmää.
- Saadaksesi solun Jn (J-sarake on apparenttikulma radiaaneissa) näyttämään +/- asteita: =IF(DEGREES(Jn)>180,DEGREES(Jn)-360,DEGREES(Jn))
- Suodattaaksesi piikit ja kuopat datasta, käytä Tools->Statistical Analysis->Forecast->Moving Average. Aseta esimerkiksi 30 Options->Intervalruutuun. Output Output range ja muokkaa vapaa sarakekirjain $-kirjaimien perään niin saat tulokset uuteen sarakkeeseen.