Ero sivun ”Seatrace tiedostoformaatti” versioiden välillä

FEWikistä
Siirry navigaatioon Siirry hakuun
Ei muokkausyhteenvetoa
Ei muokkausyhteenvetoa
Rivi 62: Rivi 62:


'''Item 16 - 23 is only available when route is active'''
'''Item 16 - 23 is only available when route is active'''
== Laskentaohjeita ==
* Saadaksesi asteita radiaaneista voit ainakin Gnumeric taulukkolaskentaohjelmassa käyttää <tt>DEGREES(solun osoite)</tt> määritelmää.

Versio 7. syyskuuta 2006 kello 11.27

SeaTrace on oheisohjelma joka kirjoittaa tiedostoon paljon enemmän dataa mitä SeaClear. Tässä on tiedostoformaatti:

Yleistä

  • Data in comma delimited text string
  • All speed in Knots
  • Lat & Long in decimal deg
  • Other angles in Radians

Sarakkeet

0: added UTC time and date from Computer, not GPS (note that SeaClear can adjust computers time from GPS)
1: GPS Lat position D.D converted on display to M D.D N+/S-
2: GPS Long position D.D converted on display to M D.D E+/W-
3: GPS Speed knots
4: True heading from GPS rad converted on display to deg 0/360
5: Magnetic Heading from GPS rad converted on display to deg 0/360
6: Magnetic error from GPS rad converted on display to deg E+/W-
7: Depth meters
8: True wind dir relative to heading rad converted on display to deg -180/+180
9: Relative wind dir rad converted on display to deg -180/+180
10: Geographical wind dir rad converted on display to 0/360
11: True wind speed m/s converted on display to knots
12: Relative wind speed m/s converted on display to knots
13: Speed Parallel to Wind knots
14: Compass Heading rad converted on display to deg 0/360
15: Water speed
16: WP Lat position D.D converted on display to M D.D N+/S-
17: WP Long position D.D converted on display to M D.D E+/W-
18: RL Bearing origin to destination WP rad converted on display to deg 0/360
19: Current XTE Nm
20: RL Heading from current position to WP rad converted on display to deg 0/360
21: Distance to WP Nm
22: Waypoint Closure Velocity (speed made good) knots
23: Target WP Name


Item 16 - 23 is only available when route is active

Laskentaohjeita

  • Saadaksesi asteita radiaaneista voit ainakin Gnumeric taulukkolaskentaohjelmassa käyttää DEGREES(solun osoite) määritelmää.